Tractor Talk Discussion Board |
Re: Re: Re: Re: 12 volt 9N.......HELP!
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Tyler(WA) on March 30, 2001 at 07:57:21 from (12.13.226.18):
In Reply to: Re: Re: Re: 12 volt 9N.......HELP! posted by Ray,IN on March 29, 2001 at 18:11:50:
I share Ray's view of 6v systems. They work fine and don't need any "more" care than a 12v system to opperate as they were designed to. If going to 12v "fixes" a problem... you're only delaying the real problem and what ever made your 6v system "not work" will fail all together sometime in the future. NOW - with all that said.... If your purpose for converting to 12v is for economy and improved performance at lower rpm... converting to 12v makes real sense. You can buy everything needed to upgrade a system from 6v to 12v for less that the cost of a new 6v regulator. You can usually pick up a 12v coil off something you have laying around (I have several) and a 12v battery and 12v lamps are not real expensive. The Delco 10SI is under $40 at most part stores and it bolts up to most mounts with little head scratching involved. Once completed, you have a trouble free charging system that offers superior voltage regulation and assured output at much lower rpm than your generator ever thought possible. It doesn't look right at a restoration show, but the workers in the field hardly ever notice.
Follow Ups:
Home
| Forums
Today's Featured Article -
Harvestin Hay: The Early Years (Part 2) - by Pat Browning. The summer of 1950 was the start of a new era in farming for our family. I was thirteen, and Kathy (my oldest sister) was seven. At this age, I believed tractor farming was the only way, hot stuff -- and given a chance I probably would have used the tractor, Dad's first, a 1936 Model "A" John Deere, to go bring in the cows! And I think Dad was ready for some automation too. And so it was that we acquired a good, used J. I. Case, wire tie hay baler. In addition to a person to drive th
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|