Tractor Talk Discussion Board |
Re: belt repair
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Lyle on March 27, 2001 at 11:20:42 from (205.238.244.169):
In Reply to: belt repair posted by mike warnock on March 27, 2001 at 08:13:31:
There is at least 3 ways to splice an endless belt. As the other post indicated you can use alligator clips. That is what he was talking about. Another way we used at work was gluing them together. This method is very good, but needs special tools to do also. You have to shave the belt on a bias and also taper it.They have a tool to do this. With this method you can't even see the splice easily. The other method would be to sew it, but you would need to shave each end or you would see the belt jump each time it went around the pulley. Hope this helps. If you have a harness or tack repair shop in your area they probally can do this for you. PS. This takes special glue for the glue joint and about 12 hours drying time. The belt usually breaks somewhere other than where the glue joint is.
Follow Ups:
Home
| Forums
Today's Featured Article -
New Life for an Old Allis - by Tyler Woods. My friend Jon, has an old '39 Allis Chalmers B. He thought it a marginal tractor that had long since served its time. She smoked terribly and never had much power but he couldn't afford another so he was limping along with what he had. Jon's Allis has a small front loader and though it doesn't carry much, it serves his needs. It was the hard starting and low power that made him think it was time to replace the old girl. Jon called me to help him discover why his tractor wouldn't start
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|