In the late 1960's/early 1970's, my dad sold FMC SideWinder brand brush hogs. On the 5X5 and 6x6 series, the decks on the pull type and the 3-point were identical. The decks were shipped with whatever type hitch/axle specified, but one ordered as a pull type could be assembled as a 3-point, and vise-versa. Since I got the assignment of assembling most of the mower decks, I am 100% sure of this information.
The hitch for the pull type was a V-shape, with a tube serving as a "spreader" on the rear. The bottom hole on the V-type hitch mounted into the top mounting bracket hole on the front of the deck, IIRC. There was a link that connected one side of the hitch to the axle, so the V-shaped hitch could rotate its position as the axle rotated to raise or lower the deck. The axle appeared to be made of pipe, held to the deck by four loops made of shaped flat stock. The axle extended across the deck laterally, with approximately 18-24" rectangular extensions, to which spindles and automotive-style hubs were attached.
The factory-supplied lift mechanism was a rudimentary ratchet, which bolted to the deck and attached a threaded rod to the axle. This could be replaced with a hydraulic cylinder if the purchaser desired, but SideWinder didn't sell any cylinders or hoses for this purposes.
If I can find any of the old manuals--which include assembly instructions--in the collection I have from the shop, I'll try to post them on Photobucket or some other similar source, and then provide a link.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Life for an Old Allis - by Tyler Woods. My friend Jon, has an old '39 Allis Chalmers B. He thought it a marginal tractor that had long since served its time. She smoked terribly and never had much power but he couldn't afford another so he was limping along with what he had. Jon's Allis has a small front loader and though it doesn't carry much, it serves his needs. It was the hard starting and low power that made him think it was time to replace the old girl. Jon called me to help him discover why his tractor wouldn't start
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.