Posted by ScottyHOMEy on October 19, 2009 at 11:30:40 from (64.222.203.141):
In Reply to: Re: Hay Press posted by LBH on October 19, 2009 at 08:18:56:
Like docgrt said, it's an IH Model 15.
There's not much to it for parts. Apart from those great, giant open gears, and the tension screws on the chute, there's very little to it for parts that aren't plain old angle iron and sheet metal. The few very few ratchets that might make for an adjustment or pawls that are on it, if they're needed at all, can be easily fabbed up from plain steel stock. Things of that sort might be a lever to trip the gizmo that loads the block that goes between bales into the stuffer on top, and drops it so that the plunger can push it ahead. After that, it's just bearings. Ebay always has surprises, but I doubt you'll find much for parts unique to the machine out there.
These things date from the days of threshing machines, and many of them were abandoned not because they were worn out, but because things like balers and combines that could be drawn behind a tractor came along. A lot of them just need a little lube and cleaning up to run.
For no more than you'd have in it at scrap prices, I'd get it and keep it and try it out. Apart from the bearings (which can be measured up for size if they need replacing), there are no parts that I would call precision on them. Marvellously simple machines.
Get hold of a belt, build three or four blocks to put between the bales, get you some wire, and give it a try.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Life for an Old Allis - by Tyler Woods. My friend Jon, has an old '39 Allis Chalmers B. He thought it a marginal tractor that had long since served its time. She smoked terribly and never had much power but he couldn't afford another so he was limping along with what he had. Jon's Allis has a small front loader and though it doesn't carry much, it serves his needs. It was the hard starting and low power that made him think it was time to replace the old girl. Jon called me to help him discover why his tractor wouldn't start
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.