Posted by Jon Hagen on April 11, 2009 at 23:30:55 from (12.175.230.36):
In Reply to: Re: ot--generators posted by john *.?-!.* cub owner on April 11, 2009 at 20:19:18:
Should not be a problem, IMPCO is still in full production of this stuff, so parts should not be a problem. An IMPCO model E vaporizer regulator should be plenty big for a 460. If the carb is a Century venturi type, you will likely need the model EO which has the low pressure orange regulator spring. For an IMPCO or Century air valve type mixer, the model EB has the higher pressure blue regulator spring. Unless prices have gone up a lot in the last couple of years, you should be able to buy a vacuum or electric fuel lock and model E vaporizer for under $250. The metering valve to convert your NG carb to LP should be only a few $$.
Call ACME at the link below, they are good to work with on projects like this. You will have to order parts from ACME through your friendly propane dealer, as they do not sell direct.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.