Posted by old bones on January 06, 2009 at 19:05:12 from (207.177.105.82):
I know this doesn't pertain to the older tractors, but need some advice on a non-antique. I traded my old 8 row 7000 JD planter in on a 12 row 7300 JD planter. I am using a JD 8100 w/fwa to pull it. I have 3 SCV's on this tractor. Since this is a mounted planter, I need, in addition to the 3 point lift, hydraulics for (a)lift assist, (b) markers, (c) folding, and (d) the vac motor. My question is- which is a better way to run the lift assist wheels? My choices, as far as I know, are: (1) use one of the SCV's and dedicate it to lift assist, or (2) plumb a coupler into the 3 point circuit so that when I lift the 3 point the lift assist will activate with the 3 point. If I dedicate an SCV to lift assist, dedicate an SCV for the vac motor, I would probably have to use the remaining SCV for folding and markers, switching as needed. If I hook the lift assist with 3 point, I assume that the 3 point will have priority over the lift assist- front raising before the back when lifting, and front lowering before the back when lowering. Right? Wrong?
I'd appreciate knowing how you did yours and any pointers. Thanks, old bones
btw- I've pretty much been away from the old 'puter for a year or 2. Too much going on. Didn't there used to be a forum for "Modern Tractors"? I could very well be wrong, but I thought I saw that a few years ago.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Life for an Old Allis - by Tyler Woods. My friend Jon, has an old '39 Allis Chalmers B. He thought it a marginal tractor that had long since served its time. She smoked terribly and never had much power but he couldn't afford another so he was limping along with what he had. Jon's Allis has a small front loader and though it doesn't carry much, it serves his needs. It was the hard starting and low power that made him think it was time to replace the old girl. Jon called me to help him discover why his tractor wouldn't start
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.