Tractor Talk Discussion Board |
Re: john deere 1010 clutch problem
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by clydo on June 24, 2005 at 03:27:18 from (67.37.26.101):
In Reply to: john deere 1010 clutch problem posted by clydo on May 30, 2005 at 16:24:07:
I think we have solved the sticking clutch plate problem on my John Deere 1010.First,here is how you can unstick thr clutch disc without tearing the tractor in half.Drill a 1/2" or so hole in the bell housing at about 2:00 o"clock.Open the inspection plate hole and place a light inside the bell housing so you can see the clutch.Take a long steel bar or a large screwdriver that is already ruined, place it through the hole you drilled, place it on the clutch disc and whack it several times[hard].This released the apparently rusted disc from the flywheel. Now,for the long term solution[I hope].My bell housing had a puddle of water in it, which kept everything rusty.I drilled a 1/4 inch hole in the bottom of the bell housing for the water to drain out.SO FAR , the clutch is not sticking.
Follow Ups:
Home
| Forums
Today's Featured Article -
New Life for an Old Allis - by Tyler Woods. My friend Jon, has an old '39 Allis Chalmers B. He thought it a marginal tractor that had long since served its time. She smoked terribly and never had much power but he couldn't afford another so he was limping along with what he had. Jon's Allis has a small front loader and though it doesn't carry much, it serves his needs. It was the hard starting and low power that made him think it was time to replace the old girl. Jon called me to help him discover why his tractor wouldn't start
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|