Tractor Talk Discussion Board |
Re: J.B. Weld It, or Not ????
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Trucker on April 12, 2002 at 22:42:14 from (65.167.169.115):
In Reply to: J.B. Weld It, or Not ???? posted by Todd on April 06, 2002 at 19:26:10:
Find out what its made out of,if its steel or cast,take it apart,find a piece of metal thats flat,and alittle bigger than the piece,drill through 3 or 4 of the bolt holes if you can and bolt it to the flat metal,not real tight,but snug,then v out the crack with a grinder and weld it by brazing or something that works for the metal it is,if its cast steel you might be able to weld it with a mig.If its cast iron you can weld it with and AC welder and nickel rod but it cracks real easy,or you can braze it.If you weld it with nickel rod heat it up with a torch some first,ask somebody thats done it before,because there is a lot more to it than just heating it and welding it.
Follow Ups:
Home
| Forums
Today's Featured Article -
New Life for an Old Allis - by Tyler Woods. My friend Jon, has an old '39 Allis Chalmers B. He thought it a marginal tractor that had long since served its time. She smoked terribly and never had much power but he couldn't afford another so he was limping along with what he had. Jon's Allis has a small front loader and though it doesn't carry much, it serves his needs. It was the hard starting and low power that made him think it was time to replace the old girl. Jon called me to help him discover why his tractor wouldn't start
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|