Posted by SleepyFarmall on October 24, 2023 at 02:17:11 from (184.53.48.222):
I post this at the risk of boring ya'll but I promise this is the last I bring it up. I last said I was going to park the IH 7' sickle mower because I was disgusted with the way it cut. I recorded a video of it and keep looking back at it to try to learn what was wrong. I can't post the video here though. All the hardware looks to be good enough to cut but I think the real problem is it isn't cutting right even though I can't identify the issue. So, it is now parked but one last question: the bar has skid plates on its bottom that make me think you just drop the bar on the ground and let it eat but when I tried that it plugged up right away. Is that an incorrect method or are you supposed to constantly adjust the bar height up and down?
Before I parked it, I decided I should park it in usable condition at least. So, I made a new pitman out of white oak again (observing the wood grain direction), replaced a broken knife section (with a used one), fabricated a new bronze bushing for the bearing end of the pitman (a crude fabrication) and greased everything up. Maybe someone will want to try it again some day, mebbe even me. Thanks, Michael
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Life for an Old Allis - by Tyler Woods. My friend Jon, has an old '39 Allis Chalmers B. He thought it a marginal tractor that had long since served its time. She smoked terribly and never had much power but he couldn't afford another so he was limping along with what he had. Jon's Allis has a small front loader and though it doesn't carry much, it serves his needs. It was the hard starting and low power that made him think it was time to replace the old girl. Jon called me to help him discover why his tractor wouldn't start
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
