Posted by redforlife on July 18, 2023 at 09:56:57 from (174.210.160.239):
In Reply to: Tire mounting posted by 37 chief on July 18, 2023 at 08:51:50:
I agree with DanielW. Don't use WD 40. Especially on tires involving a tube.
I have used dish soap. But only when needed, and diluted with water.
Lube makes life easier, but is not critical that you use it every time on every tire like it's a have to thing. In fact, if your doing the old pry bar method to mount and dis-mount, and not using a tire machine, I don't think lube helps all that much anyways. Just my opinion. The old pry bar method to mount, is just going to be a bear cat no matter how you go about it (lube or no lube). Been my experience. Positioning of the portion of the tire bead already over the rim is key more than anything. More than the lube. When doing it by hand with prybars anyways.
On a machine it's more critical. The arm of the machine that has to roll along that tire bead needs some lube to eliminate the friction there (riding against that raw rubber). You don't have that friction type scenerio going on with the ratation of the machine when prying one on with prybars.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Life for an Old Allis - by Tyler Woods. My friend Jon, has an old '39 Allis Chalmers B. He thought it a marginal tractor that had long since served its time. She smoked terribly and never had much power but he couldn't afford another so he was limping along with what he had. Jon's Allis has a small front loader and though it doesn't carry much, it serves his needs. It was the hard starting and low power that made him think it was time to replace the old girl. Jon called me to help him discover why his tractor wouldn't start
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
