Posted by redforlife on February 27, 2023 at 03:20:54 from (68.234.121.189):
In Reply to: Weak Bale spear? posted by rusty6 on February 26, 2023 at 22:44:19:
Many of these are made out of high tensil strength metal, or hardened steel. That's why people don't have much luck welding these things. And because of thier characteristics, they don't have much bend to them. They don't bend. They'll break before they do much bending.
Just lifting the bale (especially a bale that don't exceed its weight limit), is not what breaks these things. It's what the bale does while lifted and in transport. Driving across rough ground (through ruts and pot holes). The bale may then rock and put forces on the spear greater than what the bale weighs. And at points not suitable. Such as in the middle, or at the far end away from its base. Then you got leverage also working in its favor of just snapping off.
Just because you got a bale stabbed and raised, doesn't mean that the bulk of that weight is right there at the base of the spear. Often times the bulk of the weight is still midway way out on the spear. Or sometimes out on the far end of the spear. And this puts great strain on the spear at its base.
Anybody that handles many bales, has the same problems your having. It's kind of the norm. You say you don't handle many, but when you add that up over a 15 year period, it's still probably quite a few.
Some people are just incredibly rough with a bale spear (not saying you are). Some people could just break one off no matter how strong it is just from being a bad operator. Just because a spear can lift a bale, doesn't mean it's unbreakable. But some people seem to think that. I've seen people run them into the ground while driving, and try to stand a bale up with the forks still jabbed into the bale. Anyways, this such stuff is abusive, and should be avoided.
Sounds like you are snowed in. If it were me, I'd put the one on that you welded. Try to get by with it until you can get someplace. But I wouldn't bet on that one lasting long. Nothing against you. But I just know that welding these things back together, is not ussually a fix that lasts very long.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Life for an Old Allis - by Tyler Woods. My friend Jon, has an old '39 Allis Chalmers B. He thought it a marginal tractor that had long since served its time. She smoked terribly and never had much power but he couldn't afford another so he was limping along with what he had. Jon's Allis has a small front loader and though it doesn't carry much, it serves his needs. It was the hard starting and low power that made him think it was time to replace the old girl. Jon called me to help him discover why his tractor wouldn't start
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
