Hi, I'm Hyster fleet mechanic.Normally you don't need to pull the counter weight.About what year is that 120?Generally speaking you want to get the truck off the ground about two feet,make sure it's blocked safely.Pull floorboards and seat/hood assembly.Basically straight forward from there...much the same as pulling a 4.3 from a car or truck.Depending on year there might be a driveshaft mounted to front of crank that drives hydraulic pump but again pretty straight forward.Matter of unhooking battery,exhaust,wiring,hoses,drain coolant etc...if it runs on propane be carefull unhooking fuel line chances are it'll be under pressure.Engine to trans or trans adapter bolts and either four or six torque converter bolts.Over head crane works best for pulling engine but a cherry picker will work.If it has rops then you can work around and thru it.If cab remove doors or tie them back.Can pull engine hanging a come along from rops or around cab roof and then fly the load out either side of truck.Here in my shop can have engine out in about six hours working by myself.Hope this helps. Paul
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Life for an Old Allis - by Tyler Woods. My friend Jon, has an old '39 Allis Chalmers B. He thought it a marginal tractor that had long since served its time. She smoked terribly and never had much power but he couldn't afford another so he was limping along with what he had. Jon's Allis has a small front loader and though it doesn't carry much, it serves his needs. It was the hard starting and low power that made him think it was time to replace the old girl. Jon called me to help him discover why his tractor wouldn't start
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.