Posted by Pete in Holland MI on January 05, 2022 at 20:05:45 from (199.176.232.160):
In Reply to: Super A painting posted by Farmalllover13 on January 05, 2022 at 13:15:00:
Any paint job looks good the first several months. How it performs after that depends on the prep work, and the quality of paint you used.
Rattle cans are not a great choice. Paint often is pretty thin (tough coverage) and often doesn't hold any kind of a shine in in the weather.
My experience, Magic paint is pretty crappy long term. So is Rustoleum. The color (red) and shine disappears quickly. Ya get what you pay for. Not willing or interested to spend hundreds of dollars on automotive quality paint, I've had very good luck with the Iron Guard brand of paint sold at IHC/Case dealerships. It goes on well and holds it's color. A gallon will set ya back about $70 and should be adequate for your tractor. It needs to be thinned with their special thinner, or acetone. It sprays well (if you don't want to learn, convince a friend to teach ya). It can also be brushed, but don't to it in the sun on a hot day. It dries pretty quick and won't flow out.
A lot of folks paint the rims silver. They were originally galvanized. Using Rustoleum Hammered silver paint, brushed on, creates the galvanizing flakes. Again, paint in the shade and a cooler day. It needs time to flow and the crystals form.
Get thru the sucky prep work, then enjoy the finished product !
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Life for an Old Allis - by Tyler Woods. My friend Jon, has an old '39 Allis Chalmers B. He thought it a marginal tractor that had long since served its time. She smoked terribly and never had much power but he couldn't afford another so he was limping along with what he had. Jon's Allis has a small front loader and though it doesn't carry much, it serves his needs. It was the hard starting and low power that made him think it was time to replace the old girl. Jon called me to help him discover why his tractor wouldn't start
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.