I would just replace the tire when worn out. I've worked on splits for 50 years now. Don't bother me to do them.I do look at the condition of them as I work on them. We have several of them still on wagons around here and get new tires as they wear out. Yes a 22.5 rim will go on that hub if you're that worried about the rim. Like was said you do need to use a block beside the tire tread and spin as you tighten up to get straight. Tires last longer that way. Easiest is to draw up 3in a trianlge spin then adjust with the other 3 and tighten them a bit more then draw up the first 3 and so on till tight. Spinning as you go. If it gets off they will need to be loosened up some and tighten the one that is out to pull it back inline you see as you go. Worst thing it an impact to do this with as it is tightened to fast on one then has to be loosened to correct. When you take it off leave the nuts on some and hit the rim to knock the wedges loose. Sometimes they will fly quite a away reason for leaving the nuts on. I've seen them fly 20-30 feet and some times just drop off.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Life for an Old Allis - by Tyler Woods. My friend Jon, has an old '39 Allis Chalmers B. He thought it a marginal tractor that had long since served its time. She smoked terribly and never had much power but he couldn't afford another so he was limping along with what he had. Jon's Allis has a small front loader and though it doesn't carry much, it serves his needs. It was the hard starting and low power that made him think it was time to replace the old girl. Jon called me to help him discover why his tractor wouldn't start
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
