Posted by andy r on June 26, 2021 at 18:52:59 from (208.126.193.44):
I have a John Deere riding mower that I just got. Model X540. It is a fairly good size mower. I know that the previous owner had the electric PTO off a few times as he had replaced it. I acquired the mower knowing that the bolt which holds the PTO clutch on was broken off in the crankshaft. I do not know why the bolt is broken. I do know that the previous owner is not much of a mechanic and many times makes things worse than they were before he attempted to repair it. It is a 7/16 bolt. Probably fine thread. The break is not too far into the crankshaft as I can feel the end with my finger. Just inquiring about some ideas as to how you would extract the bolt. I guess I am thinking that I would center punch the end and try to drill it out with a left hand drill bit. If it doesn't catch and screw out then I would try an easy out in the hold I drilled. I assume the bolt turns right to screw it in. Any other ideas? Thank you.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Life for an Old Allis - by Tyler Woods. My friend Jon, has an old '39 Allis Chalmers B. He thought it a marginal tractor that had long since served its time. She smoked terribly and never had much power but he couldn't afford another so he was limping along with what he had. Jon's Allis has a small front loader and though it doesn't carry much, it serves his needs. It was the hard starting and low power that made him think it was time to replace the old girl. Jon called me to help him discover why his tractor wouldn't start
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.