Posted by Jim.ME on April 28, 2019 at 04:56:45 from (74.65.186.86):
In Reply to: Blown something posted by Mertz54 on April 27, 2019 at 10:50:04:
So the current on line parts catalog was an aid in going down the wrong path. The cut from it, I posted earlier, is incorrect as to how they were originally equipped. So noted, thank you, and I agree info left for the future should be correct.
After a bit of searching, here is the electrical system drawing from a 1940 parts manual. It does not have the relay shown in the current on line Ford/New Holland catalog. The starter switch supplies the battery voltage to the starter, when pushed.
As to having a solenoid/relay being a "hack" job and bypassing the safety feature it depends how it was done. The original safety starter switch can still be functional as designed for safety and use a solenoid/relay at the starter. It is a matter of using the right solenoid and re-wiring the start circuit correctly through the mechanical switch to energize the solenoid. Like systems using a solenoid, activated by the key switch or a starter button, the battery cable would go to the solenoid and another cable from solenoid to starter. The solenoid would be activated only by the mechanical safety starter switch. Lighter gauge wires could be used for the mechanical safety switch circuit. True, this is not correct to the original equipment (nor needed), but it can be done, and retain the safely feature, if done properly.
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Life for an Old Allis - by Tyler Woods. My friend Jon, has an old '39 Allis Chalmers B. He thought it a marginal tractor that had long since served its time. She smoked terribly and never had much power but he couldn't afford another so he was limping along with what he had. Jon's Allis has a small front loader and though it doesn't carry much, it serves his needs. It was the hard starting and low power that made him think it was time to replace the old girl. Jon called me to help him discover why his tractor wouldn't start
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.