Posted by Ultradog MN on May 03, 2018 at 19:41:40 from (172.58.83.98):
I'm working near the State Fairgrounds and right amidst the U of M farm campus research fields. Both are right in St Paul. He main Ag campus with it's dozens of huge buildings are about an 80 away. Somehow about a 40 got cut out of the U's 200? areable acres. Or maybe it never belonged to them. Anyway, the whole 40 was developed into houses about 30 years ago. So I went out to the pickup to get something this morning and hear the distinctive sound of a 2 cyl JD. Now I know I did see some plowing when I was here last fall. About a 60 horse New Holland pulling 3 bottoms. But I knew the U wasn't doing spring plowing with a 2 cylinder John Deere. So I follow the sound, beyond the end of the cul de sac I'm in. The people on that end got bigger lots so two neighbors share about half a tillable acre. And there's the H working. An average old tractor. Pulling about a 14" Allis plow. The plow was nice. Probably never spent a night outside in it's life. My dad had an H for a couple of years so I knew a little about them. I walked up to watch the operation and maybe get a photo for the boards. I could see that last year about 1/4 acre had been tilled. The old guy pulls up and stops and the conversation goes a little like this; Hi. I'm working in the area and heard a John Deere back here. He starts to smile. "Is that an H?" "Yes it is." I said, "What did those make? About 15 horsepower" "On a good day. This one won't do that anymore. I said, "Well, it's doing a nice job of plowing anyway. Is that an Allis plow?" He said, "Yes." "I never knew this was back here." He said, "Yeah, my neighbor and I own larger parcels." Then we talked for a bit. I said, "You don't often see tractors plowing right in the middle of the city" He said, "No. But I was raised on a farm so I still enjoy a little of it" Then I said, "Well mister, I'm on the clock so I better get back to work." He said, "Well, have a good morning." I said, Thank you. You too. That's a real nice rig you have there. He waved and throttled the engine back up and went to work. As did I. I don't think he had it over about 5/8 throttle. Beautiful black dirt that he's probably turned since they parceled this area out. Funny but having played with old tractors and following these boards for a few years I could tell the soil was still a little wet to be plowing today. My guess is it will clump up more when it dries. But I'm not complaining. Neither was the H. It was a nice thing to see this morning. And this was fun to write. Thanks
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Life for an Old Allis - by Tyler Woods. My friend Jon, has an old '39 Allis Chalmers B. He thought it a marginal tractor that had long since served its time. She smoked terribly and never had much power but he couldn't afford another so he was limping along with what he had. Jon's Allis has a small front loader and though it doesn't carry much, it serves his needs. It was the hard starting and low power that made him think it was time to replace the old girl. Jon called me to help him discover why his tractor wouldn't start
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
