I went through about a 6 or 8 month stage when I was 19 or 20 where everything I touched fell apart. I either couldn't get anything right or it fell apart in my hands. It seemed like the harder I tried the worst things got. It was extremely frustrating for me and the guys I worked with. I was working for an excavating contractor at the time, thankfully he showed me some grace and didn't fire me. Fast forward 20 years or so and my oldest son is now helping me do things around the house. This kid is number 4 in his class but don't have a lick of common sense. I am not wired that way and it is really frustrating for me. I have showed him how to change the oil in my wife's van at least 6 or 8 times. Sent him out one day to do it on his own. Went out 30 minutes later and oil is not even drained yet. Ask him why? He said he couldn't find the 13mm wrench. Never dawned on him to get a 13mm socket. Stuff like that over and over again. Bad thing is I had the poor kid scared to death to do anything because I would yell at him. I had to back off and let him figure things out on his own. As long as he wasn't going to get hurt. Took me the better part of a year to get him to come out of that. He is 16 now and is getting pretty sharp on stuff. I just have to give him very clear directions or he will over analyze the task at hand.
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Life for an Old Allis - by Tyler Woods. My friend Jon, has an old '39 Allis Chalmers B. He thought it a marginal tractor that had long since served its time. She smoked terribly and never had much power but he couldn't afford another so he was limping along with what he had. Jon's Allis has a small front loader and though it doesn't carry much, it serves his needs. It was the hard starting and low power that made him think it was time to replace the old girl. Jon called me to help him discover why his tractor wouldn't start
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
