Posted by abertarelli on November 02, 2016 at 17:43:50 from (24.8.142.32):
I have a case 580ck that developed a knock that came on quick. I cut the machine and started to dissect it before i made it worse. After battling the crap out of the stearing frame to get it out of the way, i finally one the battle and dropped the pan. The head came off super easy, but the stuck bolts on the a frame under the pan were not fun to get out. Each bolt took forever. I one the battle and the pan is off. i can see the damage but am not sure what to do about it. The number three connecting rod is loose and has a ton of play at the crank. I can move it around and believe that is the source of the issue. However i cant tell if the connecting rod is worn or the crank is worn. Everything looks smooth and not scored but it is lose as can be. I guess that explains why it ran fine with no smoke or anything, just developed a knock super quick. Head is fine, pistons and sleeves are unscored. It is a 188d. I have hawked this forum for years but never posted anything. I am just seeking some advise from somoene out there that has more knowledge of these case 188's than me. Any advise would be appreciated. My inclintion is to replace the connecting rod with a new one and see. Seams that would be the easiest thing to do, as i have not split the tractor, because i was unsure of the issue. If i have to pull the crank does the motor have to be seperated to get it out? Advise from the infinate wisdom of this list would be appreciated.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Life for an Old Allis - by Tyler Woods. My friend Jon, has an old '39 Allis Chalmers B. He thought it a marginal tractor that had long since served its time. She smoked terribly and never had much power but he couldn't afford another so he was limping along with what he had. Jon's Allis has a small front loader and though it doesn't carry much, it serves his needs. It was the hard starting and low power that made him think it was time to replace the old girl. Jon called me to help him discover why his tractor wouldn't start
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
