Posted by Steve@Advance on February 11, 2016 at 08:34:00 from (108.245.66.82):
In Reply to: Making dump trailer posted by comfortking on February 11, 2016 at 06:56:55:
No, I don't think that will work. Starter motors are designed for intermittent use. The size pump you would need would take a long time to raise the load.
You'll need to do some research. The hardest part will be determining the amount of force the cylinder will need to lift the load. Not just the combined weight of the bed and load, but the geometry of the cylinder must be considered.
If you have the original cylinder and pump and a brand name, the surest way would be to find out the GPM and pressure the system was designed for. If you know the pressure, and the displacement of the cylinder, you can decide what pump you need and what speed you can expect it to lift. Also need to figure the volume of oil to fill the cylinder in order to size the tank.
You may be able to find an electric pump that will work, but it will be slow. Hydraulic components are expensive, you'll want to do this right and do it once, otherwise it can be very frustrating!
Upload one or more videos to your post. Photo filesizes should be less than 300K and Videos, less than 2MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Life for an Old Allis - by Tyler Woods. My friend Jon, has an old '39 Allis Chalmers B. He thought it a marginal tractor that had long since served its time. She smoked terribly and never had much power but he couldn't afford another so he was limping along with what he had. Jon's Allis has a small front loader and though it doesn't carry much, it serves his needs. It was the hard starting and low power that made him think it was time to replace the old girl. Jon called me to help him discover why his tractor wouldn't start
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.