Posted by JD Seller on January 18, 2015 at 18:29:04 from (208.126.198.123):
In Reply to: Road tractor question posted by G.Fields on January 18, 2015 at 17:18:29:
G.Fields: I would stay away from the old military trucks. They maybe low miles and fairly well maintained but they all are usually oddball combinations od equipment. The one that they all are is a true 24 volt system. Then the rest of the vehicle can have components that are not common in the civilian market.
Just pick out a common brand of truck that has support in your area and then just watch for bargains. The older tractors sell cheap usually anyway. There are a lot sold for long haul work but no one wants to risk an old truck miles form home. So you can get a good usable truck for not that much money. $5-10K can buy you a lot of truck.
I have had good luck finding ones with bad clutches or transmissions. The value is usually way under what the cost of the repairs are. You can hire anew clutch installed for under $2000. A 10 speed transmission can be bought used for under $1000. Just makes sure your not looking at some rare type. A common old 10 speed Eaton is easy and cheap to come by.
The one major brand I try to stay away from is Mack. They are a pretty good truck but a lot of the parts are Mack only. Even if it is an Eaton transmission it could easily be not a common ratio or something. This makes repairing them be more costly at times.
International and Freightliner are the most common and the easiest to find parts for.
Peterbilt and Kenworth will just about always be higher in price for the same condition. I also just do like the ergonomics of them as well as International or Freightliner. I am not a long nose liking driver. They also do not turn as short as International or Freightliner do.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Life for an Old Allis - by Tyler Woods. My friend Jon, has an old '39 Allis Chalmers B. He thought it a marginal tractor that had long since served its time. She smoked terribly and never had much power but he couldn't afford another so he was limping along with what he had. Jon's Allis has a small front loader and though it doesn't carry much, it serves his needs. It was the hard starting and low power that made him think it was time to replace the old girl. Jon called me to help him discover why his tractor wouldn't start
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
