Posted by The tractor vet on January 15, 2015 at 14:03:45 from (104.179.81.68):
In Reply to: Gmc 7000 update posted by Zach Scherf on January 15, 2015 at 08:40:37:
Well just because there is NO FUEL in the vac line does not mean that the reg is good. Back when i bought my first new high tech injected one ton i had a problem with it and like you i took it to people that were suppose to be in the know . Yea wright , the only thing they knew how to do was lighten up my check book and not fix the problem . Mine was on a 460 Ford and like yours ran rough plum ate gas and smoked like a diesel with the wick turned up . Well i figured it was time i LEARN this new high tech junk. So all customer work came to a standstill . I talked to other people and got all kinds of Well it could be this and it could be that and on and on and still no fix .Bought a fuel pressure gauge and hooked it up and OH MY why is the fuel pressure running so high . Oh what fun job it was to remove and once off and a little testing with a vac. pump and gauge told me that this thing was junk . Took the drive to the Ford dealer and bought a new one and everybody there kept telling me that they don't go bad only if they are leaking into the vac. line . Well mine did not leak into the vac. line but it would NOT let the gas flow back to the tank and was DUMPING it all thru the injectors . Installed the new Reg. and The engine ran like a swiss watch. I also said that i was never buying a scan tool also , YEA wright i now have a Snap On Solus . Along with other special items. IF your going to work on this new junk that is suppose to be SO much better then the old ya have to have it .
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Harvestin Hay: The Early Years (Part 2) - by Pat Browning. The summer of 1950 was the start of a new era in farming for our family. I was thirteen, and Kathy (my oldest sister) was seven. At this age, I believed tractor farming was the only way, hot stuff -- and given a chance I probably would have used the tractor, Dad's first, a 1936 Model "A" John Deere, to go bring in the cows! And I think Dad was ready for some automation too. And so it was that we acquired a good, used J. I. Case, wire tie hay baler. In addition to a person to drive th
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.