Posted by Jiles on July 30, 2014 at 08:35:48 from (69.137.29.28):
How many of you use lock washers?
I worked in a large Aluminum Processing plant and in some departments we used lock washers and in other departments we used none.
All the machinist went to a company paid schooling about the use of lock washers and during the meeting we were asked if we had any comments.
I was the only one to make a comment out of about fifty participants.
I made the statement that the circumstances determine whether a lock washer is recommended.
I personally do not use any lock washers on any of my equipment because if it is torqued down correctly and the clearance hole is the right size, a lock washer is not unnecessary.
This got a huge response both from the schooling instructor and the participants.
I further made the comment that I only used a LW when a gasket is involved and the bolts can't be torqued.
How many LW have you seen inside an engine??
Lets say that you are attaching the hitch pins to a three point disk and you use LWs, If the washer breaks, it will fall out and you have a loose bolt.
It should also be noted that the instructor agreed with me that a lock washer should not be used again after removal because the sharp edge that cuts into the surface will, in most cases, become dull after removal.
I am not trying to start an argument just wanting some opinions.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Life for an Old Allis - by Tyler Woods. My friend Jon, has an old '39 Allis Chalmers B. He thought it a marginal tractor that had long since served its time. She smoked terribly and never had much power but he couldn't afford another so he was limping along with what he had. Jon's Allis has a small front loader and though it doesn't carry much, it serves his needs. It was the hard starting and low power that made him think it was time to replace the old girl. Jon called me to help him discover why his tractor wouldn't start
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
