Posted by JDseller on April 15, 2012 at 10:18:35 from (208.126.196.144):
In Reply to: Ford 800 posted by ButcherMan on April 15, 2012 at 08:44:31:
Like others have posted you might have a suction line issue. It is letting air into the suction side so the main pump can't draw hydraulic oil.
If it is just a priming issue then take an air blow gun and pressurize the hydraulic reservoir. Take the filler plug out and wrap a rag around the blow gun. Just don't over do it as you can blow the seals out. Do this while it is running. If the pump starts working that maybe just a one time thing. If it does not work after you restart the tractor then you have a leak in the suction line.
Take the PTO lever/cover off of the left side. then blow back threw the hydraulic pump thru the bleeder plug hole. Just pressurize it a little bit. While you are doing this look through the PTO cover hole and see if you can see where the tube is leaking. It will usually bubble.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Life for an Old Allis - by Tyler Woods. My friend Jon, has an old '39 Allis Chalmers B. He thought it a marginal tractor that had long since served its time. She smoked terribly and never had much power but he couldn't afford another so he was limping along with what he had. Jon's Allis has a small front loader and though it doesn't carry much, it serves his needs. It was the hard starting and low power that made him think it was time to replace the old girl. Jon called me to help him discover why his tractor wouldn't start
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.