Posted by Heat Houser on August 26, 2011 at 09:31:53 from (69.66.35.73):
In Reply to: taking back some ground posted by farmer in the (WI) dells on August 26, 2011 at 06:11:48:
Many years ago a frind of mine made a 3 point puller for his tractor. It pulled up 4 inch trees easily by first clamping around the tree and then raising the tractor's 3 point hitch. He basically built a bit of a frame out of steel he had laying around. I will describe the end that clamped the tree, you can visualize what kind of frame work would be needed to attach it to the 3 point arms.
The clamp used a standard hyd cylinder to clamp the tree against a bar. The bar was a piece from an old culitvator and was maybe 2 inch square solid shaft, suitablly braced to the 3 point attaching frame. The clamp was flame cut from some 1/2 inch material, two pieces, top and bottom, with some stiffening material between. This material did not go all the way to the nose of the clamp as the outer end was allowed to swallow the bar so a smaller tree could be clamped. The clamping portion was rounded and clamped against the straight bar.
I lifted/pulled up 6-7 inch trees with it using my JD4630, He used an IH 656 and pulled 4-5 inch. It worked slick.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Life for an Old Allis - by Tyler Woods. My friend Jon, has an old '39 Allis Chalmers B. He thought it a marginal tractor that had long since served its time. She smoked terribly and never had much power but he couldn't afford another so he was limping along with what he had. Jon's Allis has a small front loader and though it doesn't carry much, it serves his needs. It was the hard starting and low power that made him think it was time to replace the old girl. Jon called me to help him discover why his tractor wouldn't start
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.