Posted by CNKS on February 27, 2013 at 14:33:35 from (216.144.104.128):
I have found 2 numbers for my SM main bearing torque. There is no IH service manual for the SM that I am aware of. There is a 4 cyl gas engine manual (ISS 1039-1) that covers most of the gas engines, mostly oriented to power units if that makes a difference. Anyway that manual gives a torque value of 67 ft lbs, the M service manual and the I&T manual both give 100 ft lbs. What is the correct value? There is a difference in the crankshafts. M up to sn 278050 has a main journal of 2.74xx diameter according to the I&T manual. I&T manual and the ISS 1039-1 manuals give a diameter of 2.80xx for later serials and the C264 up. I am guessing that the 100 ft lb for all is correct but I am not sure. Any help appreciated. Also the cap has thick washers for the bolts, one of them broke. Do I have to use the thick washer or can I simply stack plain washers to get that thickness?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.