Posted by 400D Guy on March 29, 2012 at 13:37:32 from (69.76.146.214):
I'm pretty happy. That seal that was leaking isn't leaking any more. I put 3 hours on it yesterday pulling various things around to break in the rebuilt motor, and not a single hint of oil was coming from the seal area. It must have healed itself following the first 2 hours of breaking-in the other day. Very happy about it.
On another note, the injection pump is now dropping one drip of diesel every 3 seconds, up from one drip per 6 seconds. Folks at Iowa Injection tell me one drop every 5 seconds is the top end of OK. Is there anything you can add to slow it down? The pump pressure is very good, and is almost pegging the pressure meter (about 1/8" from the right hand peg).
Thinking about adding a catch jar with a little hose connecting the drain pipe to the top of the jar, placing it below the bottom of the pump. A pint or so every few hours is what I would probably catch. (Hate the mess of dripping diesel on the concrete floor.)
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.