On this first one for a 650, I just drew a high contrast shape with a felt pen and let a metal fabricator use his "seeing-eye" pantagraph, torch out the 3/4" metal pieces. This was done about 15 years ago.
On the second one, I made templates from sheet plastic and mailed them to a shop that does nothing but burning. In both cases, the holes are located in the plate one at a time. I use a threaded fastener with a point machined on the outside end. It goes into the tractor frame and protrudes about 1/16". The plate gets whacked against it.
All this cutting can be done with high precision with a water-jet or laser. All the fabricator needs is a good print. The cutting head is controlled with a digital file. Those with cad-cam software could probably send the file on an email.
Here are a couple more pieces professionally torch-cut. I like square cut kerfs. Some might think that the hardware was factory made.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.