Posted by pete 23 on November 06, 2011 at 19:52:09 from (74.32.238.142):
In Reply to: 656 Farmall Hydraulics posted by atkins52206 on November 06, 2011 at 17:56:11:
You have a few options here. Like other poster said, just add another valve, it bolts right along side of one you have. You will have to get a valve that is open on both sides though as the one you have most likely is closed on outside. It may have a cover plate on outside, depending on vintage of tractor. Or, you can mount a joy stick or double valve on the loader, route oil from your one valve you have and tie that valve back to hold it . Or, get a power beyond valve plate, mount that on your valve, again use a joy stick or double valve on loader. This will allow you to still use your original valve if needed for something else. Another option, electrical control valve hooked to your original valve. Lot of different choices.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.