Posted by Randy-IA on December 24, 2010 at 11:00:32 from (207.177.83.69):
In Reply to: Re: Wheel spacing?? posted by Bud DeLong on December 24, 2010 at 07:08:03:
All a matter of what works best. Since I'm not familiar with every plow made I'll admit I don't know if a 720 was even available with only three bottoms. I used a neighbors 8 bottom 720 with an on land hitch a few years ago and I wasn't impressed with anything other than it's size. It wasn't set up very well I know now. It turned the field black but it wasn't a pretty sight. It needed a 4440 dueled with plenty of ballast to pull it through sandy soil and it had plenty of wheel slip. My Oliver has roughly the same clearance as a normal 720 but I understand there's a extra clearance version too. But like I said I'm not that familiar with a lot of different types. I pull my 565 Oliver with a 1755 Oliver (86 horse) I also have 3 old #8's (3-14", 3-16" and a 4-14" and a JD 555H 3-14" some of which I pull with the Farmall M. I pull the #8 4-14" with the Oliver but it doesn't work all that well with the tire size of the Oliver.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.