Posted by IH fan on September 10, 2010 at 13:03:19 from (70.248.16.1):
In Reply to: IH 240 Steering Issues posted by John - OH on September 10, 2010 at 06:48:52:
I would check two things... the worm gear set-up in the bolster and the keyway in the steering arm. If the keyway is wallowed out, there might still be enough friction in the tapered shaft/steering arm for it to steer when steering is easy. There is a Woodruff key in the shaft/arm and easy way to check it is have someone turn the wheel and if the nut on the bottom of the shaft turns before the arm moves.... well, it shouldn't do that. If the steering shaft going into the bolster turns, but the nut on the bottom doesn't turn, it shouldn't do that either.
This is assuming it is an International and not a Farmall. Seems to be a weak point on these tractors.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.