Well, first you want to have even compression (within 10%) between all four cylinders. That is more important than having 125-140 psi. And, don't believe everything you read on the internet.
Second, you have not told us whether or not the tractor has flat-top pistons or stepped pistons, or power crater pistons. I have a rebuilt Super M with overbore (4-1/8") stepped pistons (around 1/4" step) and it registers 125+/- per cylinder with an 8060 head. If it had the stock flat-tops, I'd guess it would be around 90 to 95. It runs very well, by the way - and many tractors do with 85-95 psi while making a ample power.
You sure as heck don't need 93 octane with an 85-90 psi compression.
After 10 years of not running good, I'd look into worn cam, worn distributor, etc., before I worried about 90lb compression.
That is another thing..... did you swap distributors? Various models have different advance curves and different maximum advance degrees.
Let us know what cures your problem when you find out. We all learn from each other.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.