Posted by Leo B on April 06, 2010 at 13:11:22 from (66.78.118.199):
In Reply to: how to reprime diesel posted by Dean Beck on April 03, 2010 at 14:09:39:
The lines may have crap in them and need to be blown out with compressed air. Make sure the sediment bowl is clean. It could also be a worn arm in the fuel lift pump(right side of tractor). The arm or actuator rides on the lobe of the camshaft and that is what pumps the fuel. Sometimes this arm has too much sideways play in it and it jumps off the lobe, or the lobe is worn off square, therefore it seems like it's not getting fuel and dies. I've gone through this before. I have even removed the oil pan to make sure the arm was riding true on the lobe.
Usually a new fuel lift pump will solve the problem.
This post was edited by Leo B at 13:25:13 04/06/10.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.