Posted by Rootsy on June 12, 2009 at 10:45:16 from (24.247.111.162):
In Reply to: Farmall M overhaul posted by John Shipley on June 12, 2009 at 10:14:13:
going sleevless is going to require a trip to the machine shop, some pistons from one of the custom places and a few other items more commonly used by pullers in big inch engines...
If it is a 248 block you can go with 4" ID liners and get 264 CID.. if it's a 264 motor you can go to 4 1/8 overbore liners and get 281 CID...
Also have the option of doing a stroker assy...
All it takes is $$$ above and beyond a regular rebuild kit...
To run on E85 I would recommend the highest static CR you can get and eliminating all rubber in the fuel system. Carburetor will need to be recalibrated also. You can do a few things to get some power back out of the fuel swap but it isn't nearly as easy as playing with a SBC etc...
This post was edited by Rootsy at 10:49:38 06/12/09.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.