Posted by chad from michigan on June 12, 2009 at 09:12:13 from (151.163.3.10):
Ok guys I have talked with several of you before and I do not want to here to go through the trouble shooting guide I have it and its helpful. But I remember Janicholson telling me how to adjust my VR by adjusting the spring tension on the little coil to change the charging output. Anyway I installed an aftermarket generator/hyd unit all in one on my Farmall A. Its an old Chrylser generator with HYd to lift the old convertable tops. Anyway that doesn't matter. I installed a VR that I had and it once I pulled the cap and adjust the spring tension it started charging at about 12amps. I installed the cover and it stops charging, take cover off it charges. I remember Janicholson telling me the cover may cause the magnatism to change. Is there anything I can do so that when I have the cover on the vr will work? Thanks for any help. Chad
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.