Farmall & IHC Tractors Discussion Board |
Farmall A wiring
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall & IHC Tractors Discussion Board ]
Posted by Paul on April 11, 2000 at 20:26:04 from (216.146.147.129):
The wiring on my '45 Farmall A was getting pretty frayed and the insulation was brittle, so I decided to replace it. Instead of getting a kit, I just replaced each wire with the same size and color and made a makeshift harness with electrical tape. I plan to put a decent sheath around it so it'll mimic the original at a good savings. I also took the generator apart and cleaned it up, had it bench tested and put brushes and bushings in it. It's putting out the correct voltage via the cutout ('45 version of a regulator). The battery was bad and had been installed negative ground, so I got a new one and corrected that. Now everything is working fine, but I have a question. The light switch has several positions, which are used for various lighting needs. The most counter-clockwise position seems to be the "off" position. When in this position, no lights are on and the ammeter reads "0". In the next position clockwise, no lights are on but the ammeter reads a positive charge when the engine is running. Is this normal operation? Without an owners manual, I can only guess.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|