Posted by ChadS on January 28, 2009 at 09:40:23 from (4.224.78.65):
In Reply to: Increasing Horsepower posted by IHRedRules on January 27, 2009 at 19:02:52:
I have a 350 at 175 ci, making 50 hp on 87 octane pump gas. No LP head. I also have a 300 engine making 115+hp on "pump gas", and every part number is IH.
Everything mentioned will be a nice upgrade for what your doing. It should get ya up a good 10 hp once the tuning is done. If its still gotthe HYD pump, watch the cam gear and nut! When ya pep up one of these, the throttle response is alot quicker, more aggressive, so it can put more stress on weaker links by the sudden jolts from sudden, and faster rpm increases. Eliminating the pump is good for 5 hp easy! But it takes the usability factor down to a limited basis if hyd is required to work on the farm.
350 is a handy tractor, I use this one quite a bit, and got it in the shop to fix some hyd leaks and put on new rear rims and tires. I got a 300 Im gonna restore soon to take to a show or two. ChadS
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Uncle Cecil's Super A Lives Again - by Mike Purcell. A week or so out of most of my childhood summers was often spent with my Uncle Cecil and Aunt Sissie in the small East Texas town of Maydelle on their 80 acre farm. Some of my fondest memories of these visits are those of learning to drive a tractor at the helm of Uncle Cecil’s 1948 Farmall Super A. Uncle Cecil was the second owner of this wonderful little tractor, but it was almost as though he had adopted an infant. The original owner was a man from Minnesota who bought her from a local dea
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.