Posted by ScottyHOMEy on October 05, 2008 at 14:22:51 from (70.105.228.59):
In Reply to: C clutch posted by hicksdale on October 05, 2008 at 13:39:11:
Jeeze I wish ya hadn't done that. ;8^) Good part is that WD40 is more of a solvent than a lubricant. It penetrates pretty good, but I don't expect much of it got to the frictions surfaces of your clutch disc.
For a tractor that's been sittin' it's far more common for the faces of the clutch disc to stick to the face of the flywheel or the clutch cover rather than the shaft. To get that loose . . .
Try pulling something with your tractor. The tractor should be in gear and the clutch pedal should be depressed. The idea is that you want the whole mechanism to be in the "clutch released) position while you put enough load on it to break loose the bond holding the face of the disc.
The object you pull should not be a fixed object like a tree. You could break something trying that.
If you have something like a 3-point counterweight for a front bucket that can be dragged that can work. Another is to pull a regular road vehicle. As you pull with your clutch depressed, have a driver in the vehicle you're pulling apply their brakes to put a strain on, lock it up and drag them if that's what it takes.
Depending on what shape it was in the last time it worked properly, six months isn't all that long a time for it to have been setting. I have an idea it might break loose fairly easily.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.