Farmall & IHC Tractors Discussion Board |
The F12 is in pieces
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall & IHC Tractors Discussion Board ]
Posted by MikeH(Tx) on March 16, 2000 at 15:43:08 from (208.2.105.93):
Man, I should have done this a year ago. I started the disassembly of the F12 today. The good news - the sleeves look fine. New rings, little honing and they will work as is. The valves look great too. Just a little wire brush action needed. The scary news - I don't know how I avoided ruining this thing. The oil lines were totally fouled with gunk. The oil filter still looks brand new, but the chamber it sets on was filled completely with crud. The oil strainer in the sump was also clogged. These engines mus be some kind of strong. Did I mention that the water paths were clogged with chunks of rust and metal too? OK, I was dumb. But now I am feeling lucky that I did this in time. Had I been working the F12 instead of just listening to it, there would probably have been a meltdown.I have it pretty well disassembled. Paint is bought and ready. Did ya know that to replace the fan belt you have to undo the front engine mount? Maybe this machine wasn't quite the engineering marvel yet.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|