Posted by kossuth on April 18, 2008 at 14:56:05 from (72.23.44.112):
Well, I fear the old belly pump on the M has bitten the dust. Testing out the mowing machine today we noticed that after we tested the hydraulics on the mower that it M couldn't raise or lower the cutting head on it very well. Well, figured it probiably needed alittle more oil. Well it was down quite a bit when we checked. Put more in it and the hydraulics got alittle better but we noticed that when we put the system under pressure fluid just sprayed out from the bottom of the pump. Looked underneath and the fluid is coming out of the front shaft. I called the Ytmag folks about a rebuild kit and none was to be found apparently. How much is it going to run me roughly to get the pump back in shape or is it not really worth fixing the pump or putting an independant pump on it and fab up some sorta reservoir for the oil? We don't use the hydraulics on it alot but we use em enough we would like to get em fixed. Any suggestions from those that have gone through these pumps before?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.