Posted by Steven f/AZ on March 27, 2008 at 07:15:42 from (216.67.213.217):
In Reply to: Farmall 300 hydraulics posted by Dick fm Iowa on March 26, 2008 at 14:49:24:
If the pump is working/pumping fluid, you should hear a bit of whine from it. Also, you should be able to put your hands on the lines to and from the pump and "feel" the fluid going through.
If you don't have cylinders hooked up to the remotes, the engine should pull down a bit when you cycle them...
Another idea if you don't have cylinders - take a hose and make a loop from one outlet to the other on a remote so the fluid can just make the loop through.
I have a feeling that fluid at the priming plug doesn't necessarily mean the pump is working... did you try a bit of pressure in the reservoir? Needs to be running when you pressurize so the pump sucks the oil.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.