Posted by ScottyHOMEy on March 17, 2008 at 19:26:27 from (71.241.213.254):
In Reply to: IH B posted by Ed in Indiana on March 17, 2008 at 19:11:14:
The engine serial number, which should match the chassis serial number if the block wasn't changed out, is stamped at the top right on the side of the block. Look below the number one plug and you should see a spot that's been machined flat. The number is stamped there. It may take a little doing to read it. Likely dirty and the rod to the governor is kinda in the way.
Next step would be to look around the tractor for any date casting codes. These aren't the ones that end in D or R followed by a digit. They are #*#*X, #s are one or two digits, X, is a letter. For Bs, the letter could be anything from I to Q. The numbers are day and month, the letter is the year. My 47 BN has Ps and Qs, meaning it was assembled from parts that were cast in 1946 and 1947.
Look up the serial number you find in the table on the left of this page, and, if it matches up with any date codes in the castings, most folks would take that as a pretty good verification of its age.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.