Charles Todd said: (quoted from post at 20:24:53 02/10/08) Ok, I need 12-15 GPM and would like to either use belt or chain. Chain seems the strongest, but has issues with maintenance and transmits harmonics (vibrations). This cogged belt you speak of, you mean like a poly-chain, with teeth on the pulleys and the belt, like on servo drives?
Where would I take the input (pressure side) from? Where would I send the excess (return side)? The only hose I know of is the output from the main pump feeding the tractor and remotes.
I liked the chain setup on the picture posted above.
The chain drive above works well for that person, but it is used at low speed (1/2 throttle or less) and it is in town so they don't have to contend with any dust, mud, etc.
Personally, If I were to put a separate pump on for the loader I would purchase a reservoir/tank just for that system and keep it separate from the tractor hydraulics...
Another thought I came up with is to check on the possibility of an optional pump for the tractor... some had choices of around 9 GPM, 12 GPM and I think there was a 15 GPM pump option too. I'm not sure if that's a possibility on a 504 though.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.