Re: Adding hydraulic output to 340U

Posted by Catskill Pete on February 05, 2007 at 15:49:41 from (209.23.30.241):

In Reply to: Adding hydraulic output to 340U posted by PaulW_NJ on February 05, 2007 at 08:31:43:

I ran into the same problem with my 340, both sets of outlets tied up with the loader. What I did was to install a flow diverter in the line to the bucket. What the diverter does is with a flip of the handle is to direct the flow away from the bucket to a set of rear outlets I installed. Flip the handle back and flow returns to curling the bucket. That way the one Hydra -touch valve serves two functions and its a inexpensive fix. Probably clear as mud explaination so my mail is open if you want more info.
That said, mine has the 12 gpm trans. mounted pump and its very disappointing on my log splitter, but its nice to have a remote outlet on the back to use for implements.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]