Farmall & IHC Tractors Discussion Board |
Re: Cub rod knock, oiling problem
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by El Toro on January 23, 2007 at 04:08:38 from (152.163.100.65):
In Reply to: Cub rod knock, oiling problem posted by Steve Sawyer on January 22, 2007 at 21:34:49:
I think that is quite common on the Cubs on losing their prime on the oil pump. I would buy a new oil pressure gauge and I would plasti-gage all those bearings for clearance. Check those cylinders for wear too. There's an allen head plug at the left side of the block and you can squirt oil in here and remove the oil filter cap and fill the housing with oil and replace cap. All the Farmall tractors have their oil pump bolted directly under the engine and is submerged in oil and as are most American cars and truck engines. The Cub pump is mounted at the rear of the block and that could be a design problem. I would pay close attention to the oil pressure gauge when starting the engine. I think this has happened when changing oil too. Hal
Replies:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|