Farmall & IHC Tractors Discussion Board |
Re: Head gasket not sealing, kinda long
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by mhmalcolm on November 16, 2006 at 10:56:02 from (66.66.107.166):
In Reply to: Head gasket not sealing, kinda long posted by Superdave57 on November 14, 2006 at 18:19:29:
My guess would be a cracked head in the combustion chamber area, most likely around the valve seat area. This happened with my Dad's 400 several years ago. Had the engine overhauled and at the first oil change there was antifreeze at the engine oil drain plug. I pulled off the head and sure enough, you could just barely see a crack starting at #4 exhaust valve seat. There had never been any antifreeze in the oil before the overhaul. I figured the crack was probably starting before the engine was overhauled, and the cleaning and valve seat grinding process probably helped open it up. I hadn't done the overhaul because I was in college at the time. I got a re-built head at Central Tractor (this was in 1983)and the engine is still running with no problems.
Replies:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|