Farmall & IHC Tractors Discussion Board |
F130 Ponderings
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by EZ on October 15, 2006 at 16:56:33 from (209.105.203.10):
Well I made a spot in the shop for the 130 to spend some time as the weather starts to get cold way up North. Pulled the D15Y"s to have a look. Hmmmmm, manual says to gap to .023, but these were gapped to about .030, they look fairly new. All spark plug wires are "suppression wire" with a reading of about 3.1Kohms. No ballast resister to the coil. This tractor converted to 12vdc, using an alternator and a 12vdc coil. I am going over this tractor to see if I can get it purring right. If I am successful, I will look at purchasing it from current owner. If it requires more work than I care to do, or pay for, I will sell it for him. How much, if any, will the suppression wire affect engine performance? Later tonite I will be looking at the points and the timing.
Replies:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|