Farmall & IHC Tractors Discussion Board |
826 Front End/Steering
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Jim Allen on September 18, 2006 at 07:22:19 from (209.173.160.22):
Spent a little time working on tractor "round-to-its" this weekend. Looked at the loose steering on my 826 (adj front). The arms are loose on the spindles. When I pulled the arms off, I found the splines very worn on the arms but good on the spindles. There is no discerable slop in the bushings, so I'm hoping to just replace the arms. Here are three numbered pics that tell the tale and below are my questions related to those pics. 1) Left side, arm removed. The c-clip on the left is pretty buggered up and is gone on the right. What does it do? The splines look pretty good on the spindle. 2) The splines in the arms are really worn This is the left. The right is much worse. 3) Just for grins, here is how they tried to tighten up the arms on the right. The washer was tack welded to the arm. The parts book I have shows no washer at all. I'll probably replace this nut.
Replies:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|