Farmall & IHC Tractors Discussion Board |
Injector Leak 460 Diesel
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Smith1000 on September 07, 2006 at 16:57:46 from (64.12.116.65):
It is all back together with a new head gasket. There is a slight air leak around the #2 cyl injector. That is the one that was leaking a bit before I replaced the head gasket. The head gasket is very tight, no leaks at all. I had a hard time getting that injector out and never did get the cup out of the head. The #2 cyl exhaust valve was replaced when machined. I have the metal rings in place. Is there any way to get the air leaked stopped? Do I just not have it sealed right? It is bolted down tight. When running when first cold, it has a miss that pretty much clears up when hot (especially when the throttle is applied). Probably is the air leak, not sure. I have not retimed the pump recently.
Replies:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|