Farmall & IHC Tractors Discussion Board |
Re: Farmall super M steering
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Bob M on August 22, 2006 at 06:15:26 from (151.190.254.108):
In Reply to: Farmall super M stearing posted by rotax on August 22, 2006 at 05:10:00:
Jim - Andy pretty well sums up the possible causes. And generally it’s a combination of several of these that result in sloppy steering. A couple more things to add to Andy’s comments: 1 - If the worm gear is a full 360 deg type and the teeth are worn in the area where they contact the steering shaft worm, removing the gear and reinstalling it rotated 180 deg will present unworn teeth to the worm. However if has a sector type (“half moon”) gear the gear cannot be rotated. 2 - A worn lower bolster bushing does not affect steering wobble very much. However steering tightness is VERY sensitive to a worn upper bushing and/or pivot shaft. Any discernable fore and aft movement at the top end of the pivot shaft is a bad thing. Not a big deal to replace the upper bushing and a new one is inexpensive. However you must disassemble the steering mechanism and drop the pivot shaft to get at it. ---- Punch below for a look inside the steering a Super H. The Super M is essentially identical...
Replies:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|